| Customization: | Available |
|---|---|
| CAS No.: | 4253-34-3 |
| Formula: | Mixture |
|
Still deciding? Get samples of US$ 50/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AF-6600 Advanced Engineering Silicone Weathering Adhesive
(Strong bonding, flexibility, high elasticity, high and low temperature resistance, waterproof and aging resistance)
Product Description:
AF-6600 advanced engineering silicone weather-resistant adhesive is a one-component, neutral
room temperature curing silicone elastic sealant specially designed for waterproof sealing ni con- struction engineering. By reacting with moisture ni the air, ti solidifies into an elastic rubber body to form an effective seal.
Mainfeatures:
• Excellent adhesion, bonding to most building materials such as glass, coated metal materials, etc. without primer;
• Neutral curing, non-corrosive;
• Excellent weather resistance, strong elastic silicone rubber is formed after curing, which wil not produce significant changes due to rain, snow, strong temperature changes (-40°C~+150°C) and ultraviolet irradiation; • Single component, no dripping flow, easy to construct.
Basicuse:
AF-6600 advanced engineering silicone weathering adhesive, as an excellent waterproof and sealing materi- al, can be applied to:
• Installation and sealing of al kinds of building doors and windows, doors and windows;
• Sealing, bonding and repair of other building materials.
U s a g e restrictions:
• Al materials that will exude grease, plasticizers or solvents, such as oil-impregnated wood, oil bottom steel seams, and some unvulcanized or partially vulcanized rubber linings and tapes;
• Airtight and unventilated places (silicon glue needs to be solidified by water ni the atmosphere);
• Frosty and damp surface;
• Continuous immersion environment;
• A place under the ground where it is humid all year round;
• The surface needs to be painted, because the paint wil crack or peel off; • Places prone to wear and tear or physical damage;
• It will directly touch the surface of the food.
| Test report under GB/T14683-2003 B G F 20HM | |||||
| Seriel No. | Item | Standard Regulation | Test Result (Value) | Assessment | |
| 1 | Surface | / |
Smooth and uniform paste ,No bubble,no crust,No particles |
Qualified | |
| 2 | Density (g/cm^3) | ±0.1 | 1.45 | Qualified | |
| 3 | Sag (mm) | Vertical | ≤3 | 0 | Qualified |
| Horizontal | No deformation | No deformation | |||
| 4 | Tack-Free Time (Hour) | ≤3 | 0.5 | Qualified | |
| 5 | Extrudability (ml/min) | ≥80 | 158 | Qualified | |
| 6 | Elastic Recovery Rate (%) | ≥80 | 85 | Qualified | |
| 7 | Tensile Modulus (Mpa) | 23ºC | >0.4 or >0.6 | 0.7 | Qualified |
| 20ºC | / | ||||
| 8 | Cohesiveness | No descontruction | No descontruction | Qualified | |
| Base material of testing: glass, anodized aluminium plate | |||||
){kind=link}